Shoring Frames

Adjustable Base Jack (Hollow)

Use: The screw jack is used as a starting base for a scaffold. It has an adjustable height of up to 650mm, so that a level scaffold is always attainable. Any scaffold base should always be placed a top mudsill that are on proven solid ground.
Material: Low alloy structural steel
Finish: Electro‐Plated

Product Drawing No. Weight (kg) SWL
0SHFBJ006 SF-HAJ-00 6.5 60 kN

Adjustable U-Head – Hollow

Use: Adjustable U‐Heads are used for supporting the beams in a concrete slab support, with an adjustable height of 650mm.
Material: Low alloy structural steel
Finish: Electro‐plated

Product Drawing No. Weight (kg) SWL
0SHFUH004 SF-HAU-00 8.5 60 kN

Shoring Frames

Use: Shoring Frames are connected to each other via cross braces which space the Frames at a set distance. All are hot dip galvanized with a safe working load of 60 kN manufactured and certified to Australian/New Zealand Standards.
Material: Vertical tubes are made from Q345 / SG52 / S355 or Equivalent.
Finish: Hot Dip Galvanized.

Product Drawing No. Size (Imperial) Size (Metric) in mm Wight (kg)
0SHFFR031 SF2040-00 2′ x 4′ 685 x 1219 11
0SHFFR032 SF3040-00 3′ x 4′ 915 x 1219 13.1
0SHFFR033 SF4040-00 4′ x 4′ 1220 x 1219 16
0SHFFR034 SF5040-00 5′ x 4′ 1524 x 1219 21
0SHFFR035 SF6040-00 6′ x 4′ 1829 x 1219 24
0SHFFR036 SF7040-00 7′ x 4′ 2135 x 1219 26.8

Cross Brace

Use: Cross brace are used to connect two frames to keep vertical as per the specified distance.
Material: Q235 / S235 / Equivalent.
Finish: Pre‐Galvanized.

Product Drawing No. Frame Span Frame Height (Ft) Brace Length Hole c/c (mm) Weight (kg)
0SHFCB040 CB4030-00 4′ 2′ 1363 3.6
3′ 1363 3.6
0SHFCB046 CB4040-00 4′ 1523 3.9
0SHFCB046 CB4050-00 5′ 1723 4.5
0SHFCB047 CB4060-00 6′ 1951 5
0SHFCB048 CB4060-00 7′ 1951 5.7
0SHFCB041 CB5030-00 5′ 2′ 1641 4.3
3′ 1641 4.3
0SHFCB044 CB5040-00 4′ 1777 4.6
0SHFCB047 CB5050-00 5′ 1951 5
0SHFCB049 CB5060-00 6′ 2155 5.5
0SHFCB050 CB5060-00 7′ 2155 6.1
0SHFCB042 CB6030-00 6′ 2′ 1928 4.9
3′ 1928 4.9
0SHFCB045 CB6040-00 4′ 2044 5.3
0SHFCB048 CB6050-00 5′ 2198 5.7
0SHFCB050 CB6060-00 6′ 2380 6.1

Frame Connector

Use: Frame connector are used to connect two frame together on top.
Material: Low alloy structural steel
Finish: Hot Dip Galvanized.

Product Drawing No. Weight (kg)
0SHFCP004 SF-FC-00-E 0.66

Frame Extension

Use: To be used as extensions to shoring frame
Material: Q345 / SG52 / Equivalent.
Finish: Hot Dip Galvanized.

Product Drawing No. Size (mm) Weight (kg)
0SHFSE001 SF-EXT-30 300mm 3
0SHFSE002 SF-EXT-50 500mm 4

Base Plate + Spike (Fixed)

Use: Base Plates can be used in lieu of the Base Jack below the Shoring Frame leg when minimum height is required.
Material: Q235 / S235 / Equivalent.
Finish: Electroplated

Product Drawing No. Weight (kg)
0SHFBP004 SF-BP-00 1.6